[SENS Camera] D&N Setup -Technician Menu

all camera

[SENS Camera] D&N Setup -Technician Menu

Postby waderim@avssys.net » Fri Dec 23, 2011 10:21 am

<This is the technician menu for SENS 5 series.
previous version of SENS has different main menu and this is not applicable.>

1. Go to Special on the Menu
main menu.JPG
main menu.JPG (8.65 KiB) Viewed 10218 times

2. Push Left-Right-Left-Right quickly.
Then Technician Menu will show up.

3. Go to DN TEST and Push
technition menu.JPG
technition menu.JPG (7.45 KiB) Viewed 10218 times

This is fine tunning for day & night switching timming.
You can not set C->B lux higher than B->C.
(the higher the value is, the darker the switching timming is. )

ex1>if your camera switch to B/W way too early evening, set the value(C->B) larger.
ex2>if your camera does not switch to B/W even in the mid night, , set the value(C->B) smaller.

Setting as below picture will be the optimum.
If you want to exchange B/W-> Color earlier,
make the value of CDS B->C SLOW higher, but max. 200.
180 will be the most suitable.

DN set.JPG
DN set.JPG (9.42 KiB) Viewed 10217 times
Posts: 39
Joined: Tue Apr 06, 2010 3:18 pm

Return to Analog Camera